Additional information
| Hosszúság | L – 180 mm, M – 150 mm, XL – 212 mm, XS – 50 mm |
|---|
Black walnut handle with brass legs
€ 7,47 – € 12,94 /pcs
Wooden handle made by black walnut, with brass legs. Both materials are excellent quality, and they match each other really well. The black walnut is from North-America. This is a special type of wood finished with a natural, water-based wood oil. This gives the handle a very pleasant, warm touch.
Because of the characteristics of wood, each piece is unique, with different grains and shade. The brass legs are made with zinc alloy, which makes it even more durable. Thanks to the surface treatment, it’s steam-resistant, which means it’s not likely to oxidize.
Based on the design our recommendation is to use them in modern glam, or MCM (mid-century modern) interiors.
Cleaning
Chemical-free cleaning is recommended with dry or slightly wet wipe.
How to install
The hole drilled on the furniture should be 4 – 4,5 mm. The screw provided by us is 25 mm long, which will fit a 18-22 mm thick front. If your front is thicker or thinner, you will need a 4 mm diameter screw with the right length.
Place the handle to the (outside) hole on the front, then carefully twist the screw from the inside of the front, until the handle perfectly lays on the front of your furniture.
Advise: we recommend to use a manual screwdriver. In case you would like to use electronic screwdriver, we still recommend to use manual tool on the last few millimeters, to prevent tension in the handle.
Size
| S | Length: 50 mm |
| Width: 12 mm | |
| Depth: 35 mm | |
| M | Length: 150 mm |
| Width: 12 mm | |
| Depth: 35 mm | |
| Hole spacing: 96 mm | |
| L | Length: 180 mm |
| Width: 12 mm | |
| Depth: 35 mm | |
| Hole spacing: 128 mm | |
| XL | Length: 212 mm |
| Width: 12 mm | |
| Depth: 35 mm | |
| Hole spacing: 160 mm |
