EUR

Brass cone handle

 3,43 /pcs

Cone shaped handle made of brass. A modern classic, which will never go out of style; its simplicity makes it so great. Thanks to the material, it will be a jewelry to your furniture.

The handle is very durable. Thanks to the surface treatment, it’s steam-resistant, which means it’s not likely to oxidize. We recommend it to the fans of MCM (mid-century modern), but it will look great in a classic interior as well.

In stock

Categories: ,

Cleaning

Chemical-free cleaning is recommended with dry or slightly wet wipe.

How to install

The hole drilled on the furniture should be 4 – 4,5 mm. The screw provided by us is 25 mm long, which will fit a 18-22 mm thick front. If your front is thicker or thinner, you will need a 4 mm diameter screw with the right length.

Place the handle to the (outside) hole on the front, then carefully twist the screw from the inside of the front, until the handle perfectly lays on the front of your furniture.

Advise: we recommend to use a manual screwdriver. In case you would like to use electronic screwdriver, we still recommend to use manual tool on the last few millimeters, to prevent tension in the handle.

Size

Width: 20 mm

Hight: 20 mm