EUR

Round concrete handle – light grey

 6,60 /pcs

Concrete handles with high solidity, which make your cabinets modern and stylish. The surface is burnished and is produced with a water-resistant technology.

Due to the used technology, there can be smaller blebs which give a unique pattern to each and every piece. Every single piece is different, which makes it really special.

The handles are designed and produced by Anita Boldog, the founder of AB Concrete Design.

Recommended for cabinets, wardrobes, commodes. With built-in sheath, screw and pads.

Categories: ,

Cleaning

Chemical-free cleaning is recommended with dry or slightly wet wipe. Avoid contact with grease or water, because it can damage the material on a long-term.

How to install

The handles can be installed on a 16-21 mm thick front. If your front is thicker or thinner, you have will need a 4 mm diameter screw with the right length.
 
The hole drilled on the furniture should be 4-4,5 mm. In case the furniture is already drilled, and the hole is wider than 4-4,5 mm, a pad should be placed to the front.
 
  • Based on the above, place the handle to the hole on the front. The sheath serves as a spacer, so that you can easily grab the handle. (In case the sheath fits into the hole, the pad should be used, as mentioned above.)
  • Insert the screw from the inside of the front to the sheath

Size

Diagonal: 35 mm

Thickness: 15 mm

The hole drilled on the furniture should be 4-4,5 mm.