HUF

Walnut square handle with structured black brass legs

 6,49 12,66 /pcs

Wooden handle made by walnut tree, with structured surface black coloured brass legs. Both materials are excellent quality, and they match each other really well. We use very high quality walnut finished with a natural, water-based wood oil.

Because of the characteristics of wood, each piece is unique, with different grains and shade. The brass legs are made with zinc alloy, which makes it even more durable. Thanks to the surface treatment, it’s steam-resistant, which means it’s not likely to oxidize.

Due to the combination of wood and brass, and the design, we recommend this handle in a modern minimalist, loft/industrial or MCM (mid-century modern) interior.

SKU: N/A Categories: ,

Additional information

Hosszúság

L – 200 mm, M- 150 mm, XL – 250 mm, XS – 60 mm

Cleaning

Chemical-free cleaning is recommended with dry or slightly wet wipe.

How to install

The hole drilled on the furniture should be 4 – 4,5 mm. The screw provided by us is 25 mm long, which will fit a 18-22 mm thick front. If your front is thicker or thinner, you will need a 4 mm diameter screw with the right length.

Place the handle to the (outside) hole on the front, then carefully twist the screw from the inside of the front, until the handle perfectly lays on the front of your furniture.

Advise: we recommend to use a manual screwdriver. In case you would like to use electronic screwdriver, we still recommend to use manual tool on the last few millimeters, to prevent tension in the handle.

Size

S Length: 60 mm
Width: 22,5 mm
Depth: 36 mm
M Length: 150 mm
Width: 22,5 mm
Depth: 36 mm
Hole spacing: 96 mm
L Length: 200 mm
Width: 22,5 mm
Depth: 36 mm
Hole spacing: 128 mm
XL Length: 250 mm
Width: 22,5 mm
Depth: 36 mm
Hole spacing: 160 mm